Various types of LED Lighting

Matching Results: LED lighting

(R-790-12v) Chip Light – 12 volt AC/DC

(R-790-12v) Chip Light – 12 volt AC/DC$3.25 each

Chip light –(Evan Design) – This chip light is about twice the size of the Nano chip lights, but still small enough to use in quarter scale. It measures 3.3mm x 1.6mm x 0.8 thick with the wires attached. This version is configured to run with either 12 volt AC or DC. It is sold … [View Details]

(R-790-3v)  Chip light – 3 volt DC

(R-790-3v) Chip light – 3 volt DC$2.25 each

Chip light – (Evan Design) – This chip light is about twice the size of the Nano chip lights, but still small enough to use in quarter scale. It measures 3.3mm x 1.6mm x 0.8 thick with the wires attached. This chip is made to run on 3Volt power source.  This can be a coin battery … [View Details]

(R-790-9v)  Chip Light – 9 volt DC

(R-790-9v) Chip Light – 9 volt DC$2.25 each

Chip light –(Evan Design) – This chip light is about twice the size of the Nano chip lights, but still small enough to use in quarter scale. It measures 3.3mm x 1.6mm x 0.8 thick with the wires attached. This chip is configured to run on a 9 volt DC battery.  It is sold with … [View Details]

(R-792-12v) Nano chip –  12 volt

(R-792-12v) Nano chip – 12 volt$3.25 each

Nano chip – (Evan Design) – This is the smallest of the chips that we sell. It is 1.53mm x .76 mm. It is .5mm thick and when the wires are attached, it is 1.3mm thick. It comes wired ready to use  in 3 different configurations. This one is for use with a 12 volt AC or … [View Details]

(R-792-3v) Nano chip – 3 volt

(R-792-3v) Nano chip – 3 volt$2.25 each

Nano chip – (Evan Design) – This is the smallest of the chips that we sell. It is 1.53mm x .76 mm. It is .5mm thick and when the wires are attached, it is 1.3mm thick. It comes wired ready to use  in 3 different configurations. This one is for use with 3 V DC battery. … [View Details]

(R-792-9v) Nano chip – 9 volt

(R-792-9v) Nano chip – 9 volt$2.25 each

Nano chip – (Evan Design) – This is the smallest of the chips that we sell. It is 1.53mm x .76 mm. It is .5mm thick and when the wires are attached, it is 1.3mm thick. It comes wired ready to use  in 3 different configurations. This one is for use with a 9 volt DC battery. … [View Details]

(R-794-3v, R-794-9v, R-794-12v) Super Small LED Bulb

(R-794-3v, R-794-9v, R-794-12v) Super Small LED Bulb$2.25 each

This is a smaller LED bulb than the 1.8 mm bulb. However in my experience it does not seem as bright as the other bulbs.  The wires come straight out from the sides rather than down from the bulb itself. However, they may be bent to a 90 degree angle. The bulb may be wired … [View Details]

(R-795, R-796, R-797, R-794) – LED “Bulbs”

(R-795, R-796, R-797, R-794) – LED “Bulbs”

LED Bulbs – You have a choice of 4 different sizes of LED “bulbs”.  The size of the bulb is the diameter of the bulb.  All sizes are available in the various voltage configurations: 3v DC,  9v DC,  12v AC/DC.  The bulbs have stiff wire legs on the base of them which can be bent carefully … [View Details]

(R-795-12v) – Universal AC/DC Bulbs

(R-795-12v) – Universal AC/DC Bulbs$3.25 each

For use with a 12 volt battery or a 12 volt adapter –  these 1.8 mm LED bulbs are good for 1/2″  and 1/4″ and 1/144″ scale pieces. You must have the correct wiring set up for the voltages you are using. The wiring is not interchangeable between the 3 voltages.  The universal AC/DC LED is for use … [View Details]

(R-795-3v) 1.8 mm bulb – 3 volt

(R-795-3v) 1.8 mm bulb – 3 volt$2.25 each

For use with a 3 volt battery or adapter –  these 1.8 mm LED bulbs are good for 1/2″  and 1/4″ and 1/144″ scale pieces.  However, you must have the correct wiring set up for the voltages you are using. The wiring is not interchangeable between the 3 voltages.  These 3 volt LEDs are for … [View Details]

(R-795-9v) 1.8 mm bulb – 9 volt DC

(R-795-9v) 1.8 mm bulb – 9 volt DC$2.25 each

For use with a 9 volt battery or a 9 volt adapter – these 1.8 mm LED bulbs are good for 1/2″  and 1/4″ and 1/144″ scale pieces. . However, you must have the correct wiring set up for the voltages you are using. The wiring is not interchangeable between the 3 voltages.  These 9 volt LEDs are for … [View Details]

(R-796-12v) –  3mm bulb – Universal AC/DC Bulbs

(R-796-12v) – 3mm bulb – Universal AC/DC Bulbs$3.25 each

For use with a 12 volt battery or a 12 volt adapter –  3 mm LED bulbs are good for 1/2″  and 1″ to the foot (1:12) scale pieces. You must have the correct wiring set up for the voltages you are using. The wiring is not interchangeable between the 3 voltages.  The universal AC/DC LED is for … [View Details]