Parts needed to connect lighting to the wiring. This includes ceiling canopies, sconce and ceiling adapters, light holders, plugs and swiches.

Matching Results: Lighting Accessories – Receptacles, Canopies etc.

(R-391) – Fluorette Socket for Tape Wiring

(R-391) – Fluorette Socket for Tape Wiring$2.95

These sockets are designed specifically for the R-388, R-389, and R-390 (CK1018 series) of fluorette bulbs. The clip-in / fuse type of construction allows easy bulb installation and replacement. They can also be used for Novalytes LED fluorescent tubes R-768 to R-773. The R-391 (CK1019) has embedded nails which automatically make electrical contact with the … [View Details]

(R-392) – Fluorette Socket for Round wire

(R-392) – Fluorette Socket for Round wire$2.95 each

These sockets are designed specifically for the R-388, R-389, and R-390 (CK1018 series) of fluorette bulbs. The clip-in / fuse type of construction allows easy bulb installation and replacement. They can also be used for Novalytes LED fluorescent tubes R-768 to R-773. R-392 (CK1019-1) has solder eyes for the connection and soldering of wires at … [View Details]

(R-414) – Ceiling Canopy

(R-414) – Ceiling Canopy$6.96

The R-414 (CK800) Ceiling Canopy makes any chandelier removable with just a “twist of the wrist”. Fasten the orange disk into the ceiling by pushing the embedded nails into the tape run or by connecting to the round wire and fasten the brass canopy to the chandelier. Twist the two parts together by making a … [View Details]

(R-415) – Plug-In Ceiling Canopy

(R-415) – Plug-In Ceiling Canopy$6.96

R-415 (CK806, CK806-1)– This Ceiling Plate allows any light to be mounted on the same surface as the tape run and become a truly “plug-in” fixture. It can also be used with round wire. The ends of the wire go into the holes in the ceiling for the spring eyelets thus making contact with the … [View Details]

(R-484) – Tiny Clear Heat Shrink Tubes

(R-484) – Tiny Clear Heat Shrink Tubes$2.96 pkg.

R-484 (CK1033-3) Clear Heat Shrink tubes pkg. of 12 $2.96 The R-484 (CK1033-3) heat shrink tubes are some of the smallest made, both in diameter and wall thickness. The inside diameter is .040″ or just slightly larger than the insulation on a GOW bulb wire. The wall thickness is approximately .002″ (the thickness of transparent … [View Details]

(R-615, R-616, R-617, R-618) – Chandelier-Ceiling Adapters

(R-615, R-616, R-617, R-618) – Chandelier-Ceiling Adapters$6.95 each

R-615, R-616, R-617, R-618 Ceiling Fixture Adapters Four different diameters available in these adapters allow their use with almost any existing size chandelier/ceiling fixture. With the brass-plated finish and flush fit, they result in a well-coordinated ceiling plate assembly, usually appearing as an integral part of the chandelier/ceiling fixture plate itself. With a push-in, pull-out … [View Details]

(R-725) – Half scale Ceiling Adapter (1:24″)

(R-725) – Half scale Ceiling Adapter (1:24″)$6.95 each

The R-725 Ceiling Adapter is the Half scale version of R-615. The R-725 (CK804-4) Ceiling Adapter allows any Half Scale (1:24) light to be mounted on the same surface as the tape run and become a “plug-in” fixture. Using this push-in, pull-out chandelier/ceiling fixture adapter, chandeliers and ceiling fixtures can be made removable, using the … [View Details]

(R-726) – Half Scale Sconce Adapter  – (1:24″)

(R-726) – Half Scale Sconce Adapter – (1:24″)$6.95

Using the sconce adapter R-726 (CK801-2), it is easy to attach sconces to your electric source or change the sconces or bulb. With the sconce adapter, a sconce may be installed on either a vertical or horizontal tape run. The brass-plated finish and flush fit results in a matching and beautifully coordinating wall plate assembly. … [View Details]

(R-834) – Black Heat Shrink Tube

(R-834) – Black Heat Shrink Tube$0.70 per foot

(R-834) 1/16 inch or 3/32 inch Black Heat Shrink Tubes The R-834 larger diameter heat shrink tubes can be used for interconnecting heavier gauge wires or bundles of smaller wires. Each tube is black in color. The piece measures 1 foot in length. You cut it to your desired length. The tubing shrinks to 1/2 … [View Details]

R-369 – Round Sconce Adapter, R-369-B – Hex Sconce Adapter

R-369 – Round Sconce Adapter, R-369-B – Hex Sconce Adapter$6.95 each

R-369 Sconce Adapters for One-inch scale (See R-726 for half-scale adapter) Using the sconce adapter R-369 (CK801) or R-369-B (CK801-1), it is easy to attach sconces to your electric source or change the sconces or bulb. With the sconce adapter, a sconce may be installed on either a vertical or horizontal tape run and may … [View Details]