(R-801 -R-803) – Fire Kits


(R-801 -R-803) – Fire Kits

Each fire kit includes 3 LEDs to twist together by their already attached wires. All you have to do is twist all the red wires together and then twist all the black wires together and use either shrink tube or electrical tape to protect the joints. Then put the fire in place and add the appropriate power supply.

The 3 LEDs are: 1-flashing red, 1-flashing orange, and 1 non-flashing orange. Different flash rates on the bulbs give a random “fire” look to the fire. They have the necessary resistor or rectifier for the type of power supply you have chosen for them and are fastened together with an 8” lead wire. The FIRE Kits are available in 3v DC, 9v DC or 12v ACDC configurations. Battery or power supply not included except for the 3 volt fires. A piece of transparent cellophane with a swirled yellow, pink color is included for you to crumple down in the fire and add to the reflections and sparkle. When I have used them, I often put some aluminum foil down in the fires where it is unseen, but it makes the fire quite lively.

The fires can be used in many places beyond the fireplace. Think bonfires, trash can burning, inside heating stoves and many other places. The use you have for the fire will probably dictate the size of the LED bulbs you use. Or for a very large area, you can use several. (A walk-in fireplace in a one inch scale castle or colonial building might call for two or more). (Evan Design)